[I][COLOR=#00ff00]//............. đã bỏ bớt vài chục dòng :)[/COLOR][/I]
;
; ############################################################################
; Inbound Contexts [from]
; ############################################################################
[B][COLOR=#ff0000][from-internal][/COLOR][/B]
include => from-internal-xfer
include => bad-number
;------------------------------------------------------------------------
; [macro-setmusic]
;------------------------------------------------------------------------
; CONTEXT: macro-setmusic
; PURPOSE: to turn off moh on routes where it is not desired
;
;------------------------------------------------------------------------
[macro-setmusic]
exten => s,1,NoOp(Setting Outbound Route MoH To: ${ARG1})
exten => s,2,SetMusicOnHold(${ARG1})
;------------------------------------------------------------------------
; ##########################################
; ## Ring Groups with Confirmation macros ##
; ##########################################
; Used by followme and ringgroups
;------------------------------------------------------------------------
; [macro-dial-confirm]
;------------------------------------------------------------------------
; This has now been incorporated into dialparties. It still only works with ringall
; and ringall-prim strategies. Have not investigated why it doesn't work with
; hunt and memory hunt.
;
;------------------------------------------------------------------------
[macro-dial-confirm]
; This was written to make it easy to use macro-dial-confirm instead of macro-dial in generated dialplans.
; This takes the same parameters, with an additional parameter of the ring group Number
; ARG1 is the timeout
; ARG2 is the DIAL_OPTIONS
; ARG3 is a list of xtns to call - 203-222-240-123123123#-211
; ARG4 is the ring group number
; This sets a unique value to indicate that the channel is ringing. This is used for warning slow
; users that the call has already been picked up.
;
exten => s,1,Set(DB(RG/${ARG4}/${CHANNEL})=RINGING)
; We need to keep that channel variable, because it'll change when we do this dial, so set it to
; fallthrough to every sibling.
;
exten => s,n,Set(__UNIQCHAN=${CHANNEL})
; The calling ringgroup should have set RingGroupMethod appropriately. We need to set two
; additional parameters:
;
; USE_CONFIRMATION, RINGGROUP_INDEX
;
; These are passed to inform dialparties to place external calls through the [grps] context
;
exten => s,n,Set(USE_CONFIRMATION=TRUE)
exten => s,n,Set(RINGGROUP_INDEX=${ARG4})
exten => s,n,Set(ARG4=) ; otherwise it gets passed to dialparties.agi which processes it (prob bug)
exten => s,n,Macro(dial,${ARG1},${ARG2},${ARG3})
; delete the variable, if we are here, we are done trying to dial and it may have been left around
;
exten => s,n,DBDel(RG/${RINGGROUP_INDEX}/${CHANNEL})
exten => s,n,Set(USE_CONFIRMATION=)
exten => s,n,Set(RINGGROUP_INDEX=)
;------------------------------------------------------------------------
;------------------------------------------------------------------------
; [ext-local-confirm]
;------------------------------------------------------------------------
; If call confirm is being used in a ringgroup, then calls that do not require confirmation are sent
; to this extension instead of straight to the device.
;
; The sole purpose of sending them here is to make sure we run Macro(auto-confirm) if this
; extension answers the line. This takes care of clearing the database key that is used to inform
; other potential late comers that the extension has been answered by someone else.
;
; ALERT_INFO is deprecated in Asterisk 1.4 but still used throughout the FreePBX dialplan and
; usually set by dialparties.agi. This allows inheritance. Since no dialparties.agi here, set the
; header if it is set.
;
;------------------------------------------------------------------------
[ext-local-confirm]
exten => _LC-.,1,Noop(IN ext-local-confirm with - RT: ${RT}, RG_IDX: ${RG_IDX})
exten => _LC-.,n,GotoIf($["x${ALERT_INFO}"="x"]?godial)
exten => _LC-.,n,SIPAddHeader(Alert-Info: ${ALERT_INFO})
exten => _LC-.,n(godial),dial(${DB(DEVICE/${EXTEN:3}/dial)},${RT},M(auto-confirm^${RG_IDX})${DIAL_OPTIONS})
;------------------------------------------------------------------------
; [findmefollow-ringallv2]
;------------------------------------------------------------------------
; This context, to be included in from-internal, implements the PreRing part of findmefollow
; as well as the GroupRing part. It also communicates between the two so that if DND is set
; on the primary extension, and mastermode is enabled, then the other extensions will not ring
;
;------------------------------------------------------------------------
[findmefollow-ringallv2]
exten => _FMPR-.,1,Noop(In FMPR ${FMGRP} with ${EXTEN:5})
exten => _FMPR-.,n,Set(RingGroupMethod=)
exten => _FMPR-.,n,Set(USE_CONFIRMATION=)
exten => _FMPR-.,n,Set(RINGGROUP_INDEX=)
exten => _FMPR-.,n,Macro(simple-dial,${EXTEN:5},${FMREALPRERING})
exten => _FMPR-.,n,GotoIf($["${DIALSTATUS}" != "BUSY"]?nodnd)
exten => _FMPR-.,n,Set(DB(FM/DND/${FMGRP}/${FMUNIQUE})=DND)
exten => _FMPR-.,n(nodnd),Noop(Ending FMPR ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMPR-.,n,Hangup()
exten => _FMGL-.,1,Noop(In FMGL ${FMGRP} with ${EXTEN:5})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(${FMPRERING})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n(dodial),Macro(dial,${FMGRPTIME},${DIAL_OPTIONS},${EXTEN:5})
exten => _FMGL-.,n,Noop(Ending FMGL ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMGL-.,n,Hangup()
exten => _FMGL-.,n+10(dodnd),DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n,GotoIf($["${FMPRIME}" = "FALSE"]?dodial)
exten => _FMGL-.,n,Noop(Got DND in FMGL ${FMGRP} with ${EXTEN:5} in ${RingGroupMethod} mode, aborting)
exten => _FMGL-.,n,Hangup()
;------------------------------------------------------------------------
; [block-cf]
;------------------------------------------------------------------------
; This context is set as a target with FORWARD_CONTEXT when Call Forwarding is set to be
; ignored in a ringgroup or other features that may take advantage of this. Server side
; CF is done in dialparties.agi but if a client device forwards a call, it will be caught
; and blocked here.
;------------------------------------------------------------------------
[block-cf]
exten => _X.,1,Noop(Blocking callforward to ${EXTEN} because CF is blocked)
exten => _X.,n,Hangup()
;------------------------------------------------------------------------
; ############################################################################
; Extension Contexts [ext]
; ############################################################################
[ext-fax]
exten => s,1,Answer
exten => s,2,Goto(in_fax,1)
exten => in_fax,1,StopPlayTones
exten => in_fax,2,GotoIf($["${FAX_RX}" = "system"]?3:analog_fax,1)
exten => in_fax,3,Macro(faxreceive)
exten => in_fax,4,Hangup
exten => analog_fax,1,GotoIf($["${FAX_RX}" = "disabled"]?4:2) ;if fax is disabled, just hang up
exten => analog_fax,2,Set(DIAL=${DB(DEVICE/${FAX_RX}/dial)});
exten => analog_fax,3,Dial(${DIAL},20,d)
exten => analog_fax,4,Hangup
;exten => out_fax,1,wait(7)
exten => out_fax,1,txfax(${TXFAX_NAME},caller)
exten => out_fax,2,Hangup
exten => h,1,system(/var/lib/asterisk/bin/fax-process.pl --to ${EMAILADDR} --from ${FAX_RX_FROM} --dest "${FROM_DID}" --subject "Fax from ${URIENCODE(${CALLERID(number)})} ${URIENCODE(${CALLERID(name)})}" --attachment fax_${URIENCODE(${CALLERID(number)})}.pdf --type application/pdf --file ${FAXFILE});
exten => h,2,Hangup()
;this is where parked calls go if they time-out. Should probably re-ring
[default]
include => ext-local
exten => s,1,Playback(vm-goodbye)
exten => s,2,Macro(hangupcall)